Jolly Roger Diving

Puerto Lindo, Panama


Jolly Roger Diving is the #1 SSI dive center in Panama and as such we strive to provide top quality services to our customers. We achieve this by providing excellent SSI dive training, exciting dive locations, and equipment that is maintained better than industry standards. We believe that having regular inspections and shorter service intervals ensures that issues caused by equipment are kept to the absolute minimum.

Our History:
Our CEO, Vince Wanamaker, had a dream to retire from corporate life in the USA and spend his time diving so in 2016 he started on his journey here in Panama when he found a beautiful ocean front property on the Caribbean coast of Panama. In 2017 Vince shipped a 20' container loaded with equipment to build a dive center from the ground up. After two years of construction the dive center opened in April 2019.

As a technical diver with a high regard to safety, Vince focused on having a high-quality dive center which would be within the top 1% of dive centers worldwide. Starting with custom built redundant Nuvair compressors that were built for the hot humid tropical climate there was no detail left out. All air lines are built using 316 Stainless Steel which provide for longer life in the tropical ocean environment. With 5,000cf storage banks for Air and Nitrox we are able to fill tanks in a fraction of the time than filling directly from the compressors. Additionally, with the storage banks we now can choose when to run the compressors, avoiding days when we have smoke from local burning.

Here at Jolly Roger Diving we pride ourselves on quality! As a Mares dealer and service center we regularly inspect and service all our equipment following industry and manufacturers standards. If you ever have a question about any equipment, please ask to see our service logs as we make these publicly available for viewing. We believe a more informed diver is a safer diver. Your safety as a diver relies on us ensuring that our equipment is in perfect operational order, performing within industry and manufacturers specifications.

We follow all industry standards (at a minimum) for all our equipment inspections and servicing. Here is a list of what the industry standards are and, in some cases controlled by law.

ItemIndustry/Manufacturer Service SpecificationsOur Schedule
BCDAnnuallyInspected after every dive and serviced annually.
RegulatorAnnually - or at manufacturers specificationInspected after every dive and serviced annually or 100 dives.
TanksVisual Inspection Annually / Hydrostatic Test 5 yearsInspected after every dive and we conduct VIP's every 6 months.
Scuba CompressorMultiple Service intervals defined by manufacturer specificationsInspected prior to operations and serviced to manufacturers specifications.
Air FiltrationFilters changed every 6 months or 65,000cf of airFilters changed every 6 months or 80 hours of compressor time (~45,000cf).
Other Scuba EquipmentAt manufacturers specificationsInspected after every dive and serviced to manufactures specifications.

While diving with us you may see one of the staff attach a red zip-tie to a particular piece of equipment. Don't be alarmed this is simply a method for us to quickly identify that this particular piece of equipment needs some type of servicing. In most cases this is simply a reminder for us to change an o-ring that is leaking. If it happens to be more severe we may take it immediately out of use until our service department can inspect and repair the unit.